Your shopping cart is empty

Align Lithium Battery Balance Charger (RCC-4CX)

Manufacturer: Align RC
Model: KX850140A
Availability: Checking real-time stock status...

Quick Overview

1.Reverse polarity protection and short circuit protection.(warning beep)
2.AC 100-240V exchange switch for international specification.
3.Supply 3.6V / 3.7V 2-4 cells Li-ion/Li-polymer battery.
4.For both balance charge and charging in series. It is a fast, convenient design.
5.Balance charging is good to prevent the situation of over-charging or under-charging for a single cell.
6.Auto-detected charge status display. (Red light: while charging Green light: end of charging)
7.Cooling fan and multi-circuit protection to avoid the dangerous of charging.
8.The auto-detected function of low voltage for power storage.

Charge Method:
1.Series DC7.4V JST connector X 2 sets (no more parallel charge plug in)
2.Series DC11.1V 20A connector X 1 set(no more parallel charge plug in)
3.Balance DC7.4V connector X 2 sets
4.Balance DC11.1V connector X 1set
5.Balance DC14.8V connector X 1 set(avalible refit to DC11.1V balance connector )
Single cell circus can be parallel charging 2 sets at the same time by balance charging. Divide up 500mAh for 2Cell. The maximum suggestion is 8cell for parallel charging.

*Dimension: Length 135 x width 80x height 35 (mm)
*Series no: RCC-4CX
*Input Voltage: AC 100-240V 50-60Hz
*Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V / 4cell DC 14.8V
*Output Current: 1000 mA/cell

Align Lithium Battery Balance Charger (RCC-4CX)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views